Schluter®-DITRA is used as a waterproofing and uncoupling membrane for use in Tile and Natural Stone installations over plywood and concrete. Visit www.schluter.com for more info Schluter®-DITRA is a polyethylene membrane with a grid structure of square, cut-back cavities and an anchoring fleece laminated to its underside. In conjunction with tiled coverings, Schluter®-DITRA forms an uncoupling, waterproofing, and vapor pressure equalization layer.
Installing ceramic tile requires putting up a backer board to resist moisture, establishing lines for the tile pattern, laying out thin set mortar and pressing the tiles into place. Use plastic spacers to get the right amount of gaps between ceramic tiles with instructions from a home repair specialist in this free video on ceramic tile. Expert: Tim Gipson Contact: www.inhisstepsremodeling.com Bio: Tim Gipson is a home repair specialist and remodeling contractor in Franklin, Tenn. Filmmaker: Tim Brown
Once you apply the grout, you will need to clean the excess off of your tile floor. Watch how home remodeling expert Greg Vanden berge cleans the grout in a horizontal direction. Installing some types of tile floors will be easier than other types. Greg needed to lay out each individual tile, because of the irregular sizes and thicknesses of this type of stone. Much more of our videos and make sure that you visit our website today for more helpful home remodeling tips.
www.BucketApe.com We created this as a “hard rug” feature in the middle of our living room. No wet saw was involved, just a score and snap cutter. We used 12″ on a diagonal in the middle and then 6″ diamond tiles around it as the border. After the video we laid 17″ tiles around the rug at 90 degrees to the rug’s center tiles. We were really pleased with the results and it turned out well within the realm of the do it yourselfer.